[BusyBox] Ctrl-C doesn't works

[David Meggy]

On Thu, 2004-05-06 at 08:25, Jamie Guinan wrote:
> On Thu, 6 May 2004, Michael Pfeiffer wrote:
> 
> > Hi @ all,
> > 
> > currently I'm using BusyBox v1.00-pre8. There Ctrl-C doesn't works, so it 
> > is impossible to break any program with it. In some older archives I found 
> > the infomration that may be possible when busybox is running somehow with 
> > pid 1. But thats not the case here.
> > 
> > So what could be the reason for this problem?
> 
> I had the same issue, I'm running Busybox's /sbin/init with this
> inittab:
> 
>   ::sysinit:/etc/rcS
>   ::respawn:-/bin/sh

Try this

::sysinit:/etc/rcS
ttyS0::respawn:-/bin/sh

David

-- 
~~~~~~~~~~~~~~~~~~~~~~~~
     David Meggy
     Engineering

Technical Solutions Inc.
Unit #1 7157 Honeyman St
Delta BC Canada, V4G 1E2
     www.techsol.ca

eMail: dmeggy at techsol.ca
Tel: 604 946 TECH (8324)
Fax: 604 946 6445
~~~~~~~~~~~~~~~~~~~~~~~~